How to Install Pro Power Kit V2 for Ring Video Doorbell Pro

Your Ring Video Doorbell Pro requires the Pro Power Kit to function, so be sure to install the Pro Power Kit before installing your Ring Doorbell.

PPK_glory_art_color.png old_ppk_wireHarnessConnectedToKit.png
Pro Power Kit V2 Pro Power Kit 


Note: This article is for users of Pro Power Kit V2.

Click here if you are using the Pro Power Kit.

To install the Pro Power Kit:

  • Turn off the circuit breaker for your internal doorbell.


  • Remove the cover from your internal doorbell.


  • Loosen the "Front" and "Trans" terminal screws on your internal doorbell.


  • Connect one wire from the Pro Power Kit to the “Front” terminal, and the other wire to the “Transformer” terminal, leaving the existing doorbell wires in place. Then, re-tighten the screws. It doesn't matter which Pro Power Kit wire goes to each terminal.


  • Position the Pro Power Kit within your internal doorbell, away from any moving parts. Use the adhesive on the back of the Pro Power Kit to fix it in place, if desired.


  • Replace the cover on your internal doorbell.

Now that the Pro Power Kit is installed, you're ready to install your Ring Video Doorbell Pro. For more information, see the following articles:

Download the Manual - Ring Video Doorbell Pro

Setting up Your Ring Video Doorbell Pro in the Ring App

disabled_new Hallo buurman, chat is beschikbaar van maandag tot en met vrijdag van 8.00 tot 20.00 uur MET.