Ring Alarm Outdoor Siren
The Ring Alarm Outdoor Siren is designed to alert anyone passing by and deter intruders. You can add the Outdoor Siren to your Ring Alarm and when it's triggered, it will sound a loud 100dB+ siren and flash a red strobe LED light to alert anyone passing by. Mounts easily on the exterior wall of y...
Outdoor Siren Power Sources
The Outdoor Siren has multiple battery and hardwired power options to choose from for your convenience, and you can set them up in any order. If you plan to use the Dusk to Dawn light setting, you must have more than one power source. Before you begin, make sure the battery cover is off. When ...
Where should I mount the Outdoor Siren?
Your Outdoor Siren can be installed almost anywhere on the outside of your home or building, but we recommend choosing a spot that includes the following considerations: Visibility - Your Outdoor Siren’s LED lights and siren should be visible to anyone passing by. Safe access - You should insta...
Outdoor Siren communications test
If the Outdoor Siren communications test didn’t pass, we recommend trying several options. Move the Outdoor Siren a few inches and try again. Sometimes just moving it a bit higher, lower, to the left or to the right can solve the issue. Plug in a Range Extender indoors somewhere between Ring Ala...
Outdoor Siren settings for sound, LED, and Dusk to Dawn
The Ring Alarm Outdoor Siren has customizable volume and LED settings. Note: In some areas there are laws about the volume and duration of outdoor sirens. Check your local laws. Siren Settings The volume and duration settings are customizable. These settings do not impact the volume or duratio...
Outdoor Siren hardwiring instructions
The Ring Alarm Outdoor Siren comes with the required installation screws and mounting anchors to install the Outdoor Siren on either soft or hard surfaces such as wood or brick. Before you begin Note: Make sure your alarm system is set up and working in the Ring app before you install. You’ll n...