Your Indoor Cam has an LED light located on the front to show you the status of your unit. The meaning of the light flashes is in the chart below:
Activity | Flashing Light Pattern | Flashing Light Image |
Camera is idle | LEDs off | ![]() |
Camera is in Setup mode | Slow blinking pattern, blue light | ![]() |
Camera is starting up | Solid light, blue | ![]() |
Firmware update in progress | Light blinks on and off, then is on for two seconds, blue | ![]() |
Camera is recording | Solid light, blue | ![]() |
Two-way talk/speaker enabled | Very slow, pulsing light, blue | ![]() |
Alarm/siren is sounding | Fast blinking light, red/blue | ![]() |
Setup is successful | Light blinks on for five seconds, blue | ![]() |
Setup has failed, incorrect password | Light flashes on and off, red | ![]() |
Setup failed to connect to wifi | Light flashes on/off, red/blue | ![]() |
Camera is booting up | Solid light until bootup is complete, blue | ![]() |
Factory restore | Light blinks on and off for five seconds then reboot, red | ![]() |