A black Ring Stick Up Cam Plug-In (3rd Generation) mounted on a wall outside ready to protect

Understanding Stick Up Cam (3rd Gen) Flashing Light Patterns

Get in the know about LED flashing light patterns for your Stick Up Cam (3rd Gen) including battery, plug-in and solar power types to ensure they're working at their best. Light patterns shown in the chart below may be different if your security camera is offline. Learn how to reconnect your camera to wifi in the Ring app.

Not sure what model doorbell or security camera you have? Learn more here.

Activity
Flashing Light Pattern
Flashing Light Image
Camera is idle
LEDs off.
01-Stick-Up-Cam-Idle-Mode.jpg
Camera is in Setup mode
Slow blinking pattern, blue light.
01-Stick-Up-Cam-Setup-Mode.gif
Camera is starting up
Solid light, blue.
02-Stick-Up-Cam-Provisioning.gif
Firmware update in progress
Light blinks on and off, then is on for two seconds, blue.
03-Stick-Up-Cam-OTA.gif
Camera is recording
Solid light, blue.
04-Stick-Up-Cam-Recording.gif
Two-way talk/speaker enabled
Very slow, pulsing light, blue.
05-Stick-Up-Cam-Speaker-Enabled.gif
Alarm/siren is sounding
Fast blinking light, red/blue.
06-Stick-Up-Cam-Alarm__1_.gif
Setup is successful
Light blinks on for five seconds, blue.
07-Stick-Up-Cam-Successful-Setup.gif
Setup has failed, incorrect password
Light flashes on and off, red.
08-Stick-Up-Cam-Fail-Password.gif
Setup failed to connect to wifi
Light flashes on/off, red/blue.
11-Stick-Up-Cam-Boot-Reset.gif
Camera is booting up
Solid light until bootup is complete, blue.
11-Stick-Up-Cam-Boot-Reset.gif
Factory restore
Light blinks on and off for five seconds then reboot, red.
12-Stick-Up-Cam-Factory-Restore.gif

Last updated 3 months ago