Setting up your Ring Indoor Cam in the Ring app is simple. Simply scroll down for a step-by-step guide.
Step One - Plug in the Indoor Cam
Connect the included indoor power cord to the Indoor Cam and then connect it to a standard power outlet.
Step Two - Download the Ring App
To download the Ring app:
- On your mobile device, go to the App Store (for iOS devices) or the Play Store (for Android devices).
- Search for “Ring.”
- Download and install the Ring app on your mobile device.
Or visit ring.com/app on your mobile device.
Step Three- Create or Log in to Your Account
If this is your first Ring product, you will be asked to set up an account.
To set up an account:
- Open the Ring app.
- Select “Create Account.”
- Follow the in-app instructions to create a new account.
If you already have another Ring device installed, simply open the Ring app.
Step Four - Tap “Set Up a Device”
Tap “Set Up a Device” then select “Security Cams.”
Step Five - Scan the QR code or MAC ID barcode on your Ring device
The QR code can be found on the back of your Indoor Cam
- Point the camera on your smartphone at the QR code or MAC ID barcode on your Indoor Cam.
- This code can also be found on the product packaging or on the Quick Start Guide that came with your device.
- Center the code in the phone camera’s view at the top of the screen.
- Once the code is recognized, a green square (for QR code) or a green line (MAC ID barcode) will appear, and the setup will proceed to the next step.
Note: If you experience issues with scanning the QR code or MAC ID barcode, you can select “Set Up Without Scanning” and select “Indoor Cam” to continue through the setup process.
Step Six - Specify Your Location
If this is your first time setting up a Ring device, you will receive a request from your phone informing you that the Ring app wishes to use your phone’s location services to pinpoint your location. Allowing the app to do so will assist with inputting your address.
Enter your address information into the app, then confirm it.
If you have established a location previously, you can select it from the list of your locations.
Note: Without a specific location, certain features of your Indoor Cam will not work properly.
Step Seven - Name Your Device
Select a specific name for your Indoor Cam to distinguish it from other Ring devices on your account. You can choose one of the default names that are suggested, or you can enter your own by selecting “Custom…” at the bottom of the list.
Step Eight - Connect to Your Ring Device
iOS: Tap “Join” when the Ring app asks to join the Ring wifi network.
Android: Your device should automatically connect to the Ring wifi network.
If your device does not automatically connect to the Ring wifi network, or if you chose to continue without scanning in step five, please follow the steps below:
- Press the home button on your phone to leave the Ring app.
- Navigate to the Settings app, then tap wifi.
- On Android, you may need to navigate to Connection then wifi.
- Select the Ring wifi network from the list of available networks. The network will appear as either:
- Ring- followed by the last six digits of the MAC ID.
- Ring Setup followed by the last two digits of the MAC ID.
- Once connected, close your “Settings” app and return to the Ring app.
Step Nine - Connect Your Indoor Cam to Your Wifi
Be sure you’re near your router and have your wifi password ready.
- Select your wifi network.
- If you have more than one wifi network, select the network closest to where you will be installing your Indoor Cam.
- Enter your wifi password and press Continue.
Note: After connecting to your wifi network, your Indoor Cam may update its internal software. While performing an update, the light on the front of your device will flash blue. When the blue light stops flashing, you can tap “Continue” in the Ring app and begin using your Indoor Cam.
Step Ten - Test Your Device
Once your Indoor Cam has completed its update and setup, configure your Indoor Cam’s motion zones, then open Live View to test your camera.
Click here for instructions on physically installing your Indoor Cam.