Ring products and accessories in a bright and modern kitchen.

How the Ring Alarm Flood and Freeze Sensor Works

Learn how the Ring Alarm Flood & Freeze Sensor works with the Ring Alarm Base Station to alert1 you when water or freezing temperatures are detected in your home.

What is the Ring Flood & Freeze Sensor?

Ring’s Flood & Freeze sensor will detect water where it's installed or when the temperature drops below 40-degrees Fahrenheit. Should the sensor detect these things, it will send a notification1 to the Base Station and alert you of a water leak or a heating system issue inside your home that needs immediate attention.

Why have a Flood & Freeze Sensor?

Every year water leaks cause extensive damage to homes, costing homeowners thousands of dollars in repairs. When water enters your home from a leaking water heater, broken washing machine, or overflowing sump pump, it can wreak havoc on your home. This sensor will help you to protect your home by detecting water as soon as possible, limiting the damage that can occur.

Extreme cold can be just as damaging, and may also end up creating costly repairs. When the temperature drops, your pipes can freeze and crack. The Flood & Freeze Sensor will alert you when the temperature drops below 40-degrees Fahrenheit, so you can take action before the damage is done.

How is a Flood & Freeze Sensor placed?

Flood & Freeze Sensors are placed on the floor in any place that might experience sudden flooding or a temperature drop. Take care when placing the sensor on the floor to place it in an area where it won't accidentally be kicked or knocked out of position by pets.

Where are the usual locations for a Flood & Freeze Sensor to be installed?

We recommend installing the sensor in any place that might experience a sudden flood or temperature drop. The most common locations for a Flood & Freeze sensor are:

  • Behind a toilet.
  • Under a sink.
  • Under a fridge.
  • Beside or behind a washing machine.
  • Near a water heater.
  • In a basement.

Can the Flood & Freeze Sensor be submerged in water?

No. While the device is engineered to be air-tight, it is not meant to be submerged under water during normal operation.

Can the Flood & Freeze Sensor be painted?

No. Painting the device will keep it from functioning properly.

Can the Flood & Freeze Sensor be placed outside?

No. The Flood & Freeze Sensor is designed for indoor use.

How far can the Sensor be from the Base Station?

Your Sensor should be placed within 250 feet of the Base Station. If necessary, you can use a range extender.

How is the Flood & Freeze Sensor powered?

The Flood & Freeze Sensor is powered using a 3V lithium battery CR123A. This allows it to placed anywhere a potential flood or freezing incident might happen.

Can I use the Flood & Freeze Sensor without a Ring Alarm?

No. The Flood & Freeze Sensor requires the Ring Alarm Base Station to send notifications1 in case of a flooding or freezing event.

What is the operating temperature range for the Flood & Freeze Sensor?

The Flood & Freeze Sensor's battery has an operating temperature range of 32–104 degrees Fahrenheit F (0–40 degrees Celsius).

Is the Flood & Freeze Sensor included in Alarm security modes as a monitored sensor to trigger the alarm?

Yes. If you have a Ring Protect Pro plan and are enrolled in Professional Monitoring2, you can now optionally receive an automatic call from the monitoring2 center notifying you if water or freezing temperatures have been detected.

Tap here to learn more about Ring Protect Pro.

Can I change the low temperature set point in the app?

No, the low temperature set point is at 40-degrees Fahrenheit and cannot be changed from the app at this time.

Will I receive a notification* when water or a low temperature is no longer detected?

No. You will only receive alerts when water or low temp has been detected. You will see a history event1 when water or low temp has cleared.

What is the communication test and why is it important?

The communication test occurs after you have added, configured, and placed your sensor in its desired location. The test is important as it ensures that the sensor remains connected to the Base Station in its new location, likely under a sink or in the basement.

The Flood & Freeze Sensor keeps failing the communication test. What do I do to fix it?

Try repositioning the Sensor to be closer to the Base Station or use a range extender to strengthen the communication.

Can I only complete the communication test while setting up the Sensor in my Ring App?

No, the communication test can be completed at any time after you've added the sensor to your Base Station. Simply navigate in the Ring App to your sensor's Advanced Options on the device profile page.

How can alerts be sent for my Flood and Freeze Sensor?

Email and push notification1 alerts are available when your Ring Flood and Freeze Sensor detects water or when the temperature drops below 40-degrees Fahrenheit. In order to get these alerts,1 you need to adjust the settings so these alerts are on.

How do I manage alerts for my Flood and Freeze Sensor?

You can manage your email and push notifications1 for the Flood and Freeze Sensor from your Alarm Alerts Settings. To begin:

  1. Open the Ring app.
  2. Tap the
    menu (☰).
  3. Tap
    Devices.
  4. Tap
    Flood/Freeze Sensor.
  5. Tap the
    Monitor Settings
    tile.
  6. Select if you want to receive an audible alert, an automated call or both.

How to replace Ring Alarm Flood & Freeze Sensor's battery

Always insert replacement batteries correctly, matching the + (positive) and - (negative) symbols on the battery with the symbols on your Sensor.

1. Disarm1 your Ring Alarm.

2. Remove the cover.

3. Remove the old battery and insert the new CR123A battery, taking care to match + and - symbols with the markings on your sensor. It will reconnect to your Base Station automatically.

4. When the sensor is successfully paired, the LED will glow blue for three seconds.

5. Replace the cover.

1 Ring Alarm and all Ring Alarm accessories require a subscription for digital notifications, in-app features, digital arming/disarming, and integration with other Ring, Echo, and third party products. Subscription sold separately. View ring.com/protect-plans for pricing and details.
2 A compatible Ring Protect subscription is required to enroll in the Ring Alarm professional monitoring service. Professional monitoring service is available only within the U.S. (all 50 states, but not U.S. territories) and in Canada (excluding Quebec). Ring does not own its own professional monitoring center. Smoke and carbon monoxide monitoring is not available for commercial properties. See Ring Alarm licenses at: https://www.ring.com/licenses.
Last updated 3 months ago