Installing Your Ring Plug-in Adapter

This article will help you solve power problems by adding a Plug-In Adapter to your Ring Video Doorbell Pro. Note that the Plug-in Adapter should be used in situations where there is no existing doorbell system or the existing system is unusable. 

Installing your Plug-in Adapter

  • Choose an outlet.
    • Select a power outlet near the door where you plan to install your Ring Video Doorbell Pro. 
      • Don't plug the power adapter in yet!

wall-view_preview.jpeg

  • Run the cable.
    • Run the cable down from the outlet to your molding and then choose a path to your Video Doorbell Pro
    • Secure the cable to the wall with the provided cable clips.
      • The cable can be run through your walls, or through a door or window if desired.
      • Always be careful of existing electrical wiring and pipes when drilling through walls!

wires_preview.jpeg

  • Attach the wires.
    • Attach the power cables to the terminals on the rear of your Ring Video Doorbell Pro.

hand_preview.jpeg

 

  • Install and set up your Ring Video Doorbell Pro.
  • Set "Doorbell Type" to "None" in the Ring App. 
    • In the Ring App, select your Ring Doorbell Pro, then tap the gear icon and select "Doorbell Kit Settings."
    • Select "None" and save your settings.
      • Do not skip this step or your Ring Doorbell may be damaged!
  • Plug in the Power Adapter.
    • The front light on your Ring Video Doorbell should illuminate to indicate that it's powered properly.
    • If your Ring Doorbell has never been set up, the front light will sin, indicating that your Ring has entered Setup Mode.

hand-02_preview.jpeg

  • Test your Ring Doorbell.
    • Push the button on the front of your Ring Doorbell to try it out!

iphone-illustration_preview.jpeg

Click here to download the Ring Plug-in Adapter menu.

Was this article helpful?
46 out of 114 found this helpful

Send Feedback