Ring Video Doorbell 2 on a modern home's front door.

Setting Up Ring Video Doorbell 2 in the Ring App

Follow these steps to set up your Ring Video Doorbell 2 in the Ring app.

Before you begin installing your Ring Video Doorbell 2:

  1. Fully charge the battery using the provided orange USB cable. The battery is fully charged when only the green LED is lit.
  2. Insert the battery with the flat metal catch facing the front of the doorbell. You’ll hear a ‘click’ when the battery is properly inserted.
  3. onto your mobile device from the
    (for iOS devices) or the
    (for Android devices).

Scan the QR code on your Ring Device

You can scan the QR code on your Ring device or product packaging via the Ring app.

  1. Open the Ring app.
  2. Tap the
    menu (≡)
    .
  3. Tap
    Set up a Device.
  4. Select
    Doorbells.
  5. Tap
    I’m Ready to Scan
    .
  6. Point your smartphone’s camera at the QR code on your Ring device or product packaging.
    • Note:
      If you don’t see the QR code, please remove your video doorbell’s faceplate.
  7. Center the code in the phone camera’s view at the bottom half of the screen.
  8. When the code is recognized, a green square will appear and a pop-up with your device image detected.

If you’re having trouble scanning the QR code, try the following steps:

  1. Move your camera closer or further from the QR code to help it focus.
  2. Once your camera finds focus, hold it steady for a few seconds.

If your camera won’t focus, clean your camera lens, move to a well-lit area, and try again.

Still experiencing issues scanning the QR code? Try manually adding the device by:

  1. Open the Ring app.
  2. Tap the
    menu (≡)
    .
  3. Tap
    Set up a Device.
  4. Select
    Doorbells.
  5. Tap
    I’m Ready to Scan
    .
  6. Tap
    Other Options
    below the scanner.
  7. Select
    Can’t Scan the QR code
    .
  8. Confirm by selecting
    Enter code manually
    (this corresponds to PIN code digits underneath the QR code).
  9. Find your device in the list.
  10. Enter your five digit PIN which can be found below the QR code.

Specify your Location

If this is your first time setting up a Ring device, you will receive a request from your phone asking to pinpoint your location using your phone’s location services. Using your phone’s location services will assist the app with inputting your address.

Enter and confirm your address information in the app, or select a previously established location from your list of locations.

Learn more about the Ring app and your address

Name your device

Select a specific name for your Video Doorbell 2 to distinguish it from other Ring devices on your account. You can choose one of the default names, or you can enter your own by selecting “Custom…” at the bottom of the list.

Put your Video Doorbell 2 into Setup Mode

  1. Press and release the small black button on the front of your Video Doorbell 2.
  2. Tap
    Continue
    in the Ring app when a spinning white light appears on the front of your Video Doorbell.

Connect to the Ring wifi network

iOS: Tap Join when the Ring app asks to join the Ring wifi network.

Android: Your device should automatically connect to the Ring wifi network.

If your device does not automatically connect to the Ring wifi network, or if you chose to continue without scanning the QR code, follow the steps below:

  1. Press the
    Home
    button on your phone to leave the Ring app.
  2. Navigate to the
    Settings
    app, then tap
    wifi
    .
    • On Android, you may need to navigate to
      Connection
      then
      wifi
      .
  3. Select the Ring wifi network from the list of available networks. The network will appear as either:
    • “Ring-” followed by the last six digits of the MAC ID.
    • “Ring Setup” followed by the last two digits of the MAC ID.
  4. Once connected, close your
    Settings
    app and return to the Ring app

Connect your Video Doorbell 2 to your wifi

When you are ready to connect to your wifi network make sure you’re near your router and have your wifi password ready.

  1. Select your wifi network.
    • If you have more than one wifi network, select the network closest to where you will be installing your Video Doorbell 2.
  2. Enter your wifi password and press
    Continue
    .

After connecting to your wifi network, your Video Doorbell may update its internal software. While performing an update, the light on the front of your device will flash white. Once the light stops flashing, you know the update is complete and you can continue the setup.

Please do not attempt to ring the doorbell at this time, as it will further delay the update.

Test your device

Once your Video Doorbell has completed its update and setup, push the front button to complete a test call. This will initiate your software and ensure your doorbell is ready to function.

Install your Ring Video Doorbell 2 with an existing doorbell.

Install your Ring Video Doorbell 2 without an existing doorbell.

Last updated 4 months ago