Setting up your Ring Stick Up Cam security camera in the Ring app is simple. Simply scroll down for a step-by-step guide.
Step One - Download the Ring AppTo download the Ring app:
Or visit ring.com/app on your mobile device. |
|
Step Two - Create or Log in to Your AccountIf this is your first Ring product, you will be asked to set up an account. To set up an account:
If you already have another Ring device installed, simply open the Ring app. |
|
Step Three - Tap “Set Up a Device”Tap “Set Up a Device” then select “Security Cams.” |
|
Step Four - Scan the QR code or MAC ID barcode on your Ring deviceThe QR code or MAC ID can be found on the back of your Stick Up Cam.
Note: If you experience issues with scanning the QR code or MAC ID barcode, you can select “Set Up Without Scanning” and select “Stick Up Cam” to continue through the setup process. |
|
Step Five - Specify Your LocationIf this is your first time setting up a Ring device, you will receive a request from your phone informing you that the Ring app wishes to use your phone’s location services to pinpoint your location. Allowing the app to do so will assist with inputting your address. Enter your address information into the app, then confirm it. If you have established a location previously, you can select it from the list of your locations. Note: Without a specific location, certain features of your Stick Up Cam will not work properly. Click here to learn more about Ring devices and your address. |
|
Step Six - Name Your DeviceSelect a specific name for your Stick Up Cam to distinguish it from other Ring devices on your account. You can choose one of the default names that are suggested, or you can enter your own by selecting “Custom…” at the bottom of the list. |
|
Step Seven - Put Your Stick Up Cam into Setup ModePress and release the orange button on the back of your Stick Up Cam. When there is a blinking white light on the back of your Stick Up Cam, tap “Continue” in your Ring app. |
|
Step Eight - Connect to Your Ring DeviceiOS: Tap Join when the Ring app asks to join the Ring wifi network. Android: Your device should automatically connect to the Ring wifi network. If your device does not automatically connect to the Ring wifi network, or if you chose to continue without scanning in step four, please follow the steps below:
|
|
Step Nine - Connect Your Stick Up Cam to Your WifiBe sure you’re near your router and have your wifi password ready.
Note: After connecting to your wifi network, your Stick Up Cam may update its internal software. While performing an update, the light on the back of your device will be solid white. When the light turns off, you can tap Continue in the Ring app and begin using your Stick Up Cam. |
|
Step Ten - Test Your DeviceOnce your Stick Up Cam has completed its update and setup, configure your Stick Up Cam’s motion zones, then open Live View to test your camera. |
|