Safety and compliance information for Ring Alarm Glass Break Sensor

Failure to read and follow these safety instructions before operation could result in fire, electric shock, or other injury or damage.


WARNING! Your device should only be used in accordance with the specific instructions for use and intended purpose of the device. Using your device in any way other than its intended purpose could cause injury to yourself, others and/or damage to the device or property.

WATCH FOR SMALL PARTS! Your device and accessories may present a choking hazard to small children. Keep them out of reach of small children.

CAUTION! The device is not waterproof and as such should not be submerged in water, doing so could cause injury to yourself, others and/or damage to the device.

CAUTION! To reduce the risk of falling, take extra caution when using a ladder or similar equipment to mount the product.


This product contains alkaline batteries. This device requires batteries for use. Only use new 1.5V alkaline AA-sized batteries. Never mix old and new batteries. Keep all of the batteries out of the reach of children. Do not open, disassemble, puncture, cut, bend, shred or heat the batteries and do not allow metal objects to touch the battery terminals on the device as they can become hot and cause burns. Remove all batteries if they are worn out or before storing your device for an extended period of time. Dispose of all batteries in accordance with applicable laws and regulations and do not dispose of batteries by throwing them into a fire. If any batteries begin to leak, take steps to prevent the fluid from coming into direct contact with skin or clothes as the fluid could be corrosive and may be toxic. Remove the batteries and clean the battery compartment in accordance with the battery manufacturer’s recommendations.

CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of the used batteries according to the manufacturer’s instructions.

Maintaining your Ring Alarm Glass Break Sensor Ring Alarm Glass Break Sensor is for indoor use only. Use only accessories supplied with your device, or specifically marketed for use with your device, to power your device.

Device Name: Ring Alarm Glass Break Sensor
Model Number: 5E32E9
Electrical Rating: 3x AA Alkaline Batteries (1.5V)
Temperature Rating: 0°C - 49°C


Hereby, Ring LLC, declares that the radio equipment Ring Alarm Glass Break Sensor (5E32E9) is in compliance with Directive 2014/53/EU and relevant UK statutory requirements. The full text of the Declarations of Conformity are available at the following internet address:


In order to protect human health, Ring Alarm Glass Break Sensor meets the thresholds for exposure of the general public to electromagnetic fields according to Council Recommendation 1999/519/EC. Ring Alarm Glass Break Sensor should be installed and operated with at least 20 cm between the radiator and your body.

Wireless Features: Z-Wave
Maximum Equivalent Isotropically Radiated Power: 868.40 - 869.85 MHz 16.00 dBm EIRP


In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to

Join Our Community

Share feature requests, get help, and discuss the latest in security with your fellow users on Ring's first community forum.