If your doorbell is functioning but you can’t hear it inside your home, there are several possible reasons why you can’t hear it. Depending on the cause, though, the problem may be easy to fix. The article below will outline these reasons. Simply determine which situation describes your circumstances to find the best solution.
Identify your Doorbell Power Source
First, you’ll need to identify if your smart doorbell is battery powered or hardwired. Some general rules about Ring doorbells are:
- A 100% battery powered doorbell will be audible outside of your home, but will not ring your internal chime kit.
- A Ring doorbell that’s hardwired should ring your internal doorbell if it:
- Has adequate power from the transformer
- Is wired properly
- Links to wiring diagrams below
- Is set up in the Ring app and is connected to the appropriate chime type:
- mechanical chime - has traditional short ding-dong sound
- digital chime - has longer, more melodic sound
- Is using a compatible chime kit
- Compatible chime kit links are below categorized by doorbell-type.
Note: The one exception is the Ring Video Doorbell Wired (2021 release) which is wired but requires a Ring Chime, Ring Chime Pro or Amazon Echo/Alexa device in order to have an audible internal ring.
Battery Powered Ring Doorbells
A Ring doorbell that’s 100% battery powered will be audible outside of your home, but not inside. A battery-powered doorbell may include a battery that’s not visible, such as the Ring Video Doorbell (2020 release/2nd generation) or it may have a completely removable battery such as in the Ring Video Doorbell 3.
Doorbells that are battery-powered, but hardwired to your home power supply, get a trickle charge from the power supply. They’re primarily running off the battery, which is why they may need to be charged from time to time. The same is true about solar chargers for Ring doorbells. The doorbell will use the battery as its main source of power and get a trickle charge from the solar charger.
If it’s not an option to hardwire the doorbell, you can purchase a Ring Chime or Ring Chime Pro.
The Ring Chime is a plug in accessory that can be used to hear your doorbell inside your home.
The Ring Chime Pro is a combination wifi extender and internal chime.
Both the Chime and Chime Pro will need to be set up in your Ring app and you’ll be able to connect either one to your doorbell.
Hardwired Ring Doorbells
Hardwired means your smart doorbell is attached to your home power supply by internal wires. A hardwired doorbell may have an internal battery pack that you can’t see such as in the Ring Video Doorbell (2020 release/2nd Generation) or it may be completely wired without a battery pack at all, such as a Video Doorbell Pro. If your doorbell has an internal battery and is hardwired, it’s primarily running off the battery and getting a trickle charge from your home power supply.
If you have a Ring doorbell that’s hardwired to your home wiring, and you can’t hear the doorbell inside, there are a few potential reasons:
- You haven’t set up your doorbell in the Ring app.
- Your doorbell is disconnected from wifi.
- See instructions below on how to reconnect to wifi.
- Your doorbell is not wired properly.
- If you have just set up your doorbell and it has never activated your internal Chime kit, check the wiring diagrams for the particular configuration you want here.
- Cold weather is affecting your doorbell performance.
- Your doorbell battery is not fully charged.
- Battery-powered ring doorbells run primarily off the battery, the hardwiring provides a trickle charge, not a full continuous charge.
- Likewise, solar chargers provide a trickle charge, not full continuous power to your battery-operated device.
- Your doorbell transformer may be worn out and needs replacement.
- A licensed electrician can help you determine if your transformer needs to be replaced.
- You have an internal chime that’s not compatible with a Ring doorbell.
- Check the list below to see compatible Chime Kits for your particular Ring smart doorbell.
How to Reconnect to Wifi
- Open your Ring app
- Tap the three lines on the top left of the screen
- Tap Devices
- Tap the doorbell you want to check/reconnect
- Tap Device Health
- If your device is connected, you will see Change Wifi Network
- If your device is disconnected, you can Reconnect to wifi with your network password.
Ring has wiring diagrams for many different doorbell and internal chime kit configurations.
How to Check Your Battery Level
Batteries that are included with new Ring doorbells are partially charged because there are legal requirements about shipping lithium batteries. Your new doorbell comes with enough charge to set it up, but full battery charging can take 6-8 hours (even if the light has turned green on the battery). If you have attempted multiple set ups and failed, you may have drained the battery. In that case, it's best to fully charge the battery and start again at a later time.
To check the charge of your Ring device battery:
- Open the Ring app
- Tap the three lines on the top left of the screen
- Tap Devices
- Tap the doorbell you want to check
- Tap the Device Health tile
- Check Battery Level percentage.
- Your battery will not show the new charged percentage until after you reinstall it
Chime Kit Compatibility
Ring doorbells are compatible with many different chime kits. To see a complete list of compatible chimes, please select the model of doorbell that you have below:
- Ring Video Doorbell (2020 release/2nd generation)
- Ring Video Doorbell 2
- Ring Video Doorbell 3 and Ring Video Doorbell 3 Plus
- Ring Video Doorbell Pro
- Ring Video Doorbell Wired (2021 release) compatible with Ring Chime and Ring Chime Pro only
- Ring Video Doorbell Elite.
Hardwired Doorbells without Batteries
Hardwired doorbells without battery packs operate completely from your home power source. If you can’t hear your doorbell inside your house and your doorbell is hardwired, it’s most likely a wiring or power issue if you have set up the device in the Ring app.
Important: The one exception is the Ring Video Doorbell Wired (2021 release). If you have this doorbell, even though it’s hardwired, you won’t hear your internal doorbell ring unless you connect a Ring Chime or Ring Chime Pro.
You will still get notifications from your Ring Video Doorbell Wired (2021 release) from the Ring app and from your Alexa device if you have the Ring Skill connected.
Alexa Skill Connection