This article will help you solve power problems by adding a Plug-In Adapter to your Ring Video Doorbell Pro. Note that the Plug-in Adapter should be used in situations where there is no existing doorbell system or the existing system is unusable.
Installing your Plug-in Adapter
- Choose a socket.
- Select a power outlet near the door where you plan to install your Ring Video Doorbell Pro.
- Don't plug the power adapter in yet!
- Select a power outlet near the door where you plan to install your Ring Video Doorbell Pro.
- Run the cable.
- Run the cable down from the outlet to your molding and then choose a path to your Video Doorbell Pro
- Secure the cable to the wall with the provided cable clips.
- The cable can be run through your walls, or through a door or window if desired.
- Always be careful of existing electrical wiring and pipes when drilling through walls!
- Attach the wires.
- Attach the power cables to the terminals on the rear of your Ring Video Doorbell Pro.
- Install and set up your Ring Video Doorbell Pro.
- Set "Doorbell Type" to "None" in the Ring App.
- In the Ring App, select your Ring Doorbell Pro, then tap the gear icon and select "Doorbell Kit Settings."
- Select "None" and save your settings.
- Do not skip this step or your Ring Doorbell may be damaged!
- Plug in the Power Adapter.
- The front light on your Ring Video Doorbell should illuminate to indicate that it's powered properly.
- If your Ring Doorbell has never been set up, the front light will sin, indicating that your Ring has entered Setup Mode.
- Test your Ring Doorbell.
- Push the button on the front of your Ring Doorbell to try it out!
