Using a Wedge Kit to properly position your Video Doorbell Wired

If you're installing a Ring Doorbell on a house with aluminium siding or in a house where the door is atop a set of stairs you can use a wedge kit to properly position the Ring Video Doorbell to catch visitor motion but minimise "false positive" motion alerts.

Both of these situations require the use of a wedge kit to properly angle your Ring Video Doorbell to catch the motions you want while avoiding the motions you don't. This article will briefly explain how your Ring Video Doorbell sees the world and how to use your wedge kit.

A wedge kit allows you to adjust your vertical angle by 10 or 20 degrees, with two units included in the box. 

Find out more about purchasing a wedge kit or corner mount.

There is also a corner kit for your Ring Video Doorbell Wired which allows you to adjust your viewing angle by 25 degrees.

 

Looking downward
Your ring Video Doorbell "sees" the world in two ways. First through a camera that has a very wide view of the world as illustrated below: 

fov.png

Second, through a network of "PIR" or passive infrared sensors that the Ring Doorbell uses for motion detection. In the illustration below you can see that the motion sensors have a much more focused field-of-view than the camera and that this view is pointed downward to catch motion (as much as possible) and exclude motion sources outside that range.

correctHeight.png

Dealing with siding
If your house has siding, you'll need to take the angle of the siding into account when mounting your Ring Video Doorbell. As illustrated below, mounting the Ring Video Doorbell on siding will point the Ring Doorbell up, making it much more likely to catch passing traffic than the heat of visitors.

correctHeightSiding.png

If you mount your Ring Video Doorbell on siding, a wedge kit will properly angle your Ring Doorbell.

 correctHeightSidingWedge.png

Dealing with Stairs
If your door is above ground level with stairs leading up to it, this can cause your Ring Doorbell to miss visitors walking up your stairs and cause you to get motion alerts from passing traffic.  

correctHeightStairs.png

The solution in this case is to once again use a wedge kit to lower the angle of your Ring Doorbell. 

correctHeightStairsWedge.png

 Please note that wedge kits are paintable to match your house colour. 

Find out more about purchasing a wedge kit or corner mount.

Join Our Community

Share feature requests, get help, and discuss the latest in security with your fellow users on Ring's first community forum.

Was this article helpful?

×

 

 



Send Feedback