Setting up your Ring Stick Up Cam Elite in the Ring app is simple. Simply scroll down for a step-by-step guide.
Step One - Download the Ring App
To download the Ring app:
- On your mobile device, go to the App Store (for iOS devices) or the Play Store (for Android devices).
- Search for “Ring.”
- Download and install the Ring app on your mobile device.
Or visit ring.com/app on your mobile device
Step Two - Create or Log in to Your Account
If this is your first Ring product, you will be asked to set up an account.
To set up an account:
- Open the Ring app.
- Select “Create Account.”
- Follow the in-app instructions to create a new account.
If you already have another Ring device installed, simply open the Ring app.
Step Three - Tap “Set Up a Device”
Tap “Set Up a Device” then select “Security Cams.”
Step Four - Scan the QR code or MAC ID barcode on your Ring device
The QR code and MAC ID barcode can be found under the bottom cover of your Stick Up Cam Elite.
- Point the camera on your smartphone at the QR code or MAC ID barcode on your Stick Up Cam.
- This code can also be found on the product packaging or on the Quick Start Guide that came with your device.
- Center the code in the phone camera’s view at the top of the screen.
- Once the code is recognized, a green square (for QR code) or a green line (MAC ID barcode) will appear, and the setup will proceed to the next step.
Note: If you experience issues with scanning the QR code or MAC ID barcode, you can select “Set Up Without Scanning” and select “Stick Up Cam Elite” to continue through the setup process.
Step Five - Specify Your Location
If this is your first time setting up a Ring device, you will receive a request from your phone informing you that the Ring app wishes to use your phone’s location services to pinpoint your location. Allowing the app to do so will assist with inputting your address.
Enter your address information into the app, then confirm it.
If you have established a location previously, you can select it from the list of your locations.
Note: Without a specific location, certain features of your Stick Up Cam will not work properly.
Step Six - Choose Where Your Stick Up Cam Will Be Installed
Select either “Indoors” or “Outdoors” based on where you plan to install your Stick Up Cam.
If you chose “Indoors,” select whether or not your Stick Up Cam will be facing a window.
Step Seven - Name Your Device
Select a specific name for your Stick Up Cam Elite to distinguish it from other Ring devices on your account. You can choose one of the default names that are suggested, or you can enter your own by selecting “Custom…” at the bottom of the list.
Step Eight - Select How Your Stick Up Cam Will Be Powered
You can power Stick Up Cam in one of two ways:
- Plug it into an outlet (with USB)
- Plug it into an Ethernet port that supplies Power over Ethernet (or PoE).
Using PoE requires a special type of Ethernet switch or a dedicated PoE power supply, like the Ring PoE Adapter.
Step Nine - Put Your Stick Up Cam Elite into Setup Mode
Your Stick Up Cam will enter Setup mode after being plugged in. When the light on the front of your Stick Up Cam begins flashing blue, tap “The Light is Flashing” in your Ring app to continue to the next step.
If your Stick Up Cam does not go into Setup mode automatically after powering on, press and release the orange button under the bottom cover of your Stick Up Cam Elite.
Step Ten - Select How Your Stick Up Cam Will Connect to the Internet
Your Stick Up Cam can connect to the internet in two different ways:
Using Ethernet to connect your Stick Up Cam requires an Ethernet cable and a working Ethernet port.
- If your Stick Up Cam is powered with Power Over Ethernet, your device can use this connection to connect to the internet via Ethernet.
- If your Stick Up Cam is powered with USB, you can still use Ethernet to connect your device to the internet by connecting your Stick Up Cam to Ethernet in addition to USB.
If you do not have an Ethernet connection, or would prefer to connect to the Wi-Fi in your home, select “Wi-Fi” in your Ring app.
Step Eleven - Connect to Your Ring Device
iOS: Tap “Join” when the Ring app asks to join the Ring Wi-Fi network.
Android: Your device should automatically connect to the Ring Wi-Fi network.
If your device does not automatically connect to the Ring Wi-Fi network, or if you chose to continue without scanning in step four, please follow the steps below:
- Press the home button on your phone to leave the Ring app.
- Navigate to the “Settings” app, then tap “Wi-Fi.”
- On Android, you may need to navigate to “Connection” then “Wi-Fi.”
- Select the Ring Wi-Fi network from the list of available networks. The network will appear as either:
- “Ring-” followed by the last six digits of the MAC ID.
- “Ring Setup” followed by the last two digits of the MAC ID.
- Once connected, close your “Settings” app and return to the Ring app.
Step Twelve - Connect Your Stick Up Cam to Your Wi-Fi
If you are using Ethernet to connect your Stick Up Cam to the internet, you can skip this step and proceed to step thirteen.
If you are using Wi-Fi to connect your Stick Up Cam to the internet, please follow the steps below:
Be sure you have your Wi-Fi password ready.
- Select your Wi-Fi network.
- If you have more than one Wi-Fi network, select the network closest to where you will be installing your Stick Up Cam.
- Enter your Wi-Fi password and press “Continue.”
Note: After connecting to the internet, your Stick Up Cam may update its internal software. While performing an update, the light on the front of your device will flash blue. When the blue light stops flashing, you can tap “Continue” in the Ring app and begin using your Stick Up Cam.
Step Thirteen - Test Your Device
Once your Stick Up Cam has completed its update and setup, configure your Stick Up Cam’s motion zones, then open Live View to test your camera.