Ring Stick Up Cam Pro installed on the exterior of a home.

Installing your Stick Up Cam Pro Plug-In

Install your Stick Up Cam Pro Plug-In using this step-by-step process. Before you begin installing your Stick Up Cam Pro Plug-In, make sure that you’re following safety code standards.

Quick Start

1. Download and open the Ring app.

2. Select Set Up a Device.

3. Scan QR code with the Ring app.

Hardware included

Illustration of a screw, a screw head with a plus on it, an anchor labeled with "A," and a smaller screw and anchor labeled with "B."

Tools needed

Image of a drill, screw head with a plus on it and a screwdriver representing the tools needed for Stick Up Cam installation.

Remove protective film from device. This ensures your device works properly.

Plug USB-C Plug-In Adapter into your Stick Up Cam Pro.

Illustration of Stick Up Cam with USB-C Cable inserted into the back of the device for external power source.

If installing outdoors, remove the indoor plug tip from the adapter body and slide the outdoor extension cable on.

Stick Up Cam Pro Plug-In with an arrow up for mounting and an arrow down for removing from the mount on an exterior wall.

Choose a location with the view you want.

Your camera can be used both indoors and outside. It can sit freestanding on a tabletop, or be mounted on a wall or ceiling.

Freestanding installation

Place your camera on a tabletop or shelf and look at Live View in the Ring app to make sure it’s positioned correctly.

If you’d like your camera to have a downward angle, swivel the base around so that the longer side of the base is facing the front and tilt your camera so it points downward.

Wall installation

Remove the decorative cover from the camera mount.

Illustration of a screwdriver with 3 blue dots showing removing the screw from the mount to detach it from the rest of the camera.

Use a standard Phillips-head screwdriver (not included) to unscrew the mount and detach it from the rest of the camera.

Install the mounting plate.

Slide the mounting plate off of the camera mount.

Illustration of mounting plate for Stick Up Cam Pro next to the camera base and a blue arrow pointing down and away from the base, showing sliding the mounting plate off of the camera.

Place the mounting plate on the wall with the UP arrow pointing up.

Illustration of the front view of a camera mounting plate showing installation holes and the word "up" with an upward pointing arrow to indicate the correct position.

If installing on a wood surface or drywall, screw the plate directly into the wall.

If installing on a masonry surface, mark four screw holes using the plate as a guide.

Drill pilot holes using a 6mm drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors.

https://support.help.ring.com/hc/article_attachments/13641917991188

WARNING! Only use the included mounting screws when securing the mounting plate.

CAUTION! DO NOT drill into your home’s electrical wiring.

Mount your camera to the wall.

Screw the mount onto the back of the camera.

Illustration of a screwdriver with a blue dotted line showing where to secure the screw to attach the mount to the camera.

Slide the camera with its mount onto the mounting plate.

Tighten the security screw on the camera mount so that it’s firmly attached to the mounting plate.

Illustration of Stick Up Cam Pro and a screwdriver with a blue arrow pointing down, showing how to slide the camera onto the mounting plate and secure it with screws.

Slide the decorative cover back onto the camera mount and click it into place.

https://support.help.ring.com/hc/article_attachments/13641904822676

Secure the battery cover to the camera with the security screw (optional).

Illustration of a Stick Up Cam Pro battery cover with an arrow pointing to the correct hole to insert the security screw.

Adjust the camera angle.

Rotate the camera to focus on the area of your choice. Look at Live View in the Ring app to make sure it’s positioned at your desired angle.

Illustration of Stick Up Cam Pro mounted on a wall with a screwdriver and dotted line showing where to secure the screw. Cameras with blue arrows up, down, turning left, turning right, and front.

Ceiling installation

Remove the decorative cover from the camera mount.

Illustration of a screwdriver with 3 blue dots showing removing the screw from the mount to detach it from the rest of the camera.

Use a standard Phillips-head screwdriver (not included) to unscrew the mount and detach it from the rest of the camera.

Install the mounting plate.

Slide the mounting plate off of the camera mount.

Illustration of mounting plate for Stick Up Cam Pro next to the camera base and a blue arrow pointing down and away from the base, showing sliding the mounting plate off of the camera.

Place the mounting plate on the ceiling with the UP arrow pointing in the opposite direction from where your camera will face.

https://support.help.ring.com/hc/article_attachments/13641904834452

If installing on a wood surface or drywall, screw the plate directly into the ceiling.

If installing on a masonry surface, mark four screw holes using the plate as a guide.

Drill pilot holes using a 6mm drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors.

https://support.help.ring.com/hc/article_attachments/13641917991188

WARNING! Only use the included mounting screws when securing the mounting plate.

CAUTION! DO NOT drill into your home’s electrical wiring.

Mount your camera to the ceiling.

Screw the mount onto the back of the camera. Align the mount arm with the top of the camera.

Illustration of the back of the camera with a screwdriver pointing to the screw on the mount and a blue dotted line showing screwing the mount to the camera.

Slide the camera with its mount onto the mounting plate.

Tighten the security screw on the camera mount so that it’s firmly attached to the mounting plate.

Illustration of a Stick Up Cam sideways and a mount on the wall, with an arrow above it pointing up and over, showing how to slide the camera onto the mounting plate.

Slide the decorative cover back onto the camera mount and click it into place.

Stick Up Cam Pro sideways with an arrow pointing toward the mount, showing how to slide the decorative cover back into place.

Secure the battery cover to the camera with the security screw (optional).

Illustration of a Stick Up Cam Pro battery cover with an arrow pointing to the correct hole to insert the security screw.

Adjust the camera angle.

Rotate the camera to focus on the area of your choice. Look at Live View in the Ring app to make sure it’s positioned at your desired angle.

Illustration of Stick Up Cam Pro mounted on an eave, cameras at the bottom showing blue arrows up, turning left, pointing down, turning right, and a camera facing front, showing positions.

Last updated 2 weeks ago