Setting up your Ring Video Doorbell Pro in the Ring app is a simple process. Scroll down for a step-by-step guide.
1. Download the Ring appTo download the Ring app:
Or visit ring.com/app on your mobile device |
2. Create or log in to your accountIf this is your first Ring product, you will be asked to set up an account. To set up an account:
If you already have another Ring device installed, simply open the Ring app. |
3. Tap “Set up a Device’Tap “Set Up a Device” then select “Doorbells” |
4. Scan the QR code or MAC ID barcode on your Ring deviceYou can scan the QR code on your Ring device or product packaging via the Ring app:
If you experience issues when scanning the QR code:
If you continue to experience issues:
|
5. Specify your locationIf this is your first time setting up a Ring device, you will receive a request from your phone informing you that the Ring app wishes to use your phone’s location services to pinpoint your location. Allowing the app to do so will assist with inputting your address. Enter your address information into the app, then confirm it. If you have established a location previously, you can select it from the list of your locations. Note: Without a specific location, certain features of your Video Doorbell will not work properly. Click here to learn more about Ring devices and your address. |
6. Name your deviceSelect a specific name for your Video Doorbell Pro to distinguish it from other Ring devices on your account. You can choose one of the default names that are suggested, or you can enter your own by selecting “Custom…” at the bottom of the list. |
7. Follow the physical installation steps in the Ring appFollow the steps in the Ring app to physically install your Video Doorbell. If you have already completed these steps, tap on “I’ve Already Installed It”. If you have an existing internal doorbell, select whether it is a mechanical or digital doorbell, or select “None” if you are installing your Video Doorbell without connecting to an internal doorbell. |
8. Put your Video Doorbell Pro into setup modeIf you have never set up your Video Doorbell Pro before, it will automatically enter setup mode. Otherwise, press and release the small button on the side of your Video Doorbell Pro. When there is a spinning white light on the front of your Video Doorbell, tap the “Continue” button in your Ring app. |
9. Connect your Ring Video Doorbell Pro to the Ring wifi network
iOS: Tap Join when the Ring app asks to join the Ring wifi network. Android: Your device should automatically connect to the Ring wifi network. If your device does not automatically connect to the Ring wifi network, or if you chose to continue without scanning in step four, please follow the steps below:
|
10. Connect your Ring Video Doorbell Pro to your wifi network
Note: After connecting to your wifi network, your Video Doorbell may update its internal software. While performing an update, the light on the front of your device will flash white. Once the light stops flashing, you know the update is complete and you can continue the setup. Please do not attempt to ring the doorbell at this time, as it will further delay the update. |
11. Test your deviceOnce your Video Doorbell has completed its update and setup, push the front button to complete a test call. This will initiate your software and ensure your doorbell is ready to function. |